Clean the pickup roller
If you want to clean the pickup roller before deciding to replace it, follow these instructions:
| 1.
|
| Unplug the power cord from the device and remove the pickup roller as described in steps 1 through 5 of Change the pickup roller
|
|
| 2.
|
| Dab a lint-free cloth in isopropyl alcohol, and scrub the roller.
|
| WARNING!
|
Alcohol is flammable. Keep the alcohol and cloth away from an open flame. Before you close the device and plug in the power cord, allow the alcohol to dry completely.
|
|
| 3.
|
| Using a dry, lint-free cloth, wipe the pickup roller to remove loosened dirt.
|
|
| 4.
|
| Allow the pickup roller to dry completely before you reinstall it in the device.
|
|
| 5.
|
| Plug the power cord into the device.
|
|
HP LaserJet P1000 P1500 Clean the pickup roller