Clean the pickup roller

Clean the pickup roller


If you want to clean the pickup roller before deciding to replace it, follow these instructions:

1.
Unplug the power cord from the device and remove the pickup roller as described in steps 1 through 5 of Change the pickup roller
2.
Dab a lint-free cloth in isopropyl alcohol, and scrub the roller.

HP LaserJet P1000 P1500 scrub roller Clean the pickup roller

HP LaserJet P1000 P1500 warning Clean the pickup roller WARNING!

Alcohol is flammable. Keep the alcohol and cloth away from an open flame. Before you close the device and plug in the power cord, allow the alcohol to dry completely.

3.
Using a dry, lint-free cloth, wipe the pickup roller to remove loosened dirt.

HP LaserJet P1000 P1500 wipe roller Clean the pickup roller

4.
Allow the pickup roller to dry completely before you reinstall it in the device.

HP LaserJet P1000 P1500 reinstall roller Clean the pickup roller

5.
Plug the power cord into the device.
HP LaserJet P1000 P1500 Clean the pickup roller